lte

---

interface/lte

Conditions: !smips
Type: Directory

Flag	Name	Description
X	disabled	disabled
R	running	running
I	inactive	inactive

Argument	Type	Description
name	string
mtu	num
pin	string
apn-profiles	multi_arg { array-id, enum }
modem-init	string
operator	string
allow-roaming	bool
sms-read	bool
sms-protocol	enum (mbim | at | auto)
network-mode	multi_arg { array-id, enum }
band	multi_arg { array-id, enum }
nr-band	multi_arg { array-id, enum }

Read-only Argument	Type	Description
default-name	string
master	interface_enum
advertised-mtu	num

interface/lte/monitor

Conditions: !smips
Type: Command

Read-only Argument	Type	Description
status	string
pin-status	string
registration-status	string
functionality	enum (minimum | full | tx rf circuit disabled | rx rf circuit disabled | tx and rx rf circuit disabled | tx and rx rf circuit disabled)
manufacturer	string
model	string
revision	string
current-operator	string
roaming	bool
psc	num
lac	num
current-cellid	num
enb-id	num
sector-id	num
phy-cellid	num
access-technology	string
data-class	string
session-uptime	time
imei	string
imsi	string
iccid	string
subscriber-number	string
primary-band	string
ca-band	multi_arg { array-id, string }
ul-ca-band	multi_arg { array-id, string }
frame-error-rate	string
dl-modulation	string
dl-mimo	num
cqi	num
ri	num
mcs	num
ecio	num
rscp	num
rssi	num
rsrp	num
rsrq	num
sinr	num
nr-dl-modulation	string
nr-rsrp	num
nr-rsrq	num
nr-sinr	num

interface/lte/show-capabilities

Conditions: !smips
Type: Command

Read-only Argument	Type	Description
modem-bus-location	string
cell-scan	bool
network-scan	bool
roaming-barring	bool
apn-address-family	string
max-apn-count	num
rat-modes	string
band-selection	bool
lte-bands	string
nr-bands	string
passthrough	bool
esim-detected	bool
firmware-update	bool
lte-attach-config	bool
at-chat	bool
framed-route-apn	string

interface/lte/at-chat

Conditions: !smips
Type: Command

Argument	Type	Description
input	string
wait	alt { enum (no | yes) { no:0, yes:3 } , time [ .. 255] }

Read-only Argument	Type	Description
output	string

interface/lte/scan

Conditions: !smips
Type: Command

Flag	Name	Description
C	current	current
A	available	available
F	forbidden	forbidden

Read-only Argument	Type	Description
operator	string
mcc-mnc	string
access-technology	string
rssi	num
rsrp	num
rsrq	num

interface/lte/cell-monitor

Conditions: !smips
Type: Command

Argument	Type	Description
max-age	time

Read-only Argument	Type	Description
phy-cellid	num
band	string
psc	num
earfcn	string
rsrp	num
rsrq	num
rssi	num
sinr	num
rscp	num
age	time

interface/lte/firmware-upgrade

Conditions: !smips
Type: Command

Argument	Type	Description
upgrade	bool
firmware-file	file_enum
update-channel	enum (stable | testing)

Read-only Argument	Type	Description
installed	string
latest	string
note	string
status	string

interface/lte/apn

Conditions: !smips
Type: Directory

Flag	Name	Description
*	default	default

Argument	Type	Description
name	string
apn ( mandatory )	string
use-peer-dns	bool
use-network-apn	bool
add-default-route	bool
default-route-distance	num { }
ip-type	enum (ipv4 | ipv6 | auto)
authentication	enum (none | pap | chap)
user	string { }
password	string { }
passthrough-interface	interface_enum { none:0 }
passthrough-mac	alt { , bool , macAddr }
passthrough-subnet-size	alt { enum (auto | 32) { auto:0, 32:32 } , num [16 .. 32] }
ipv6-interface	interface_enum { none:0 }

interface/lte/esim

Conditions: !smips
Type: Directory

Flag	Name	Description
A	active	active

Read-only Argument	Type	Description
interface	interface_enum
nickname	string
name	string
spn	string
iccid	string

interface/lte/esim/provision

Conditions: !smips
Type: Command

Argument	Type	Description
interface	interface_enum
activation-code	string
activate	bool
sm-dp-plus	string
matching-id	string
confirmation-code	string
sm-dp-plus-oid	string

Read-only Argument	Type	Description
iccid	string
spn	string
name	string
status	string

interface/lte/esim/send-notifications

Conditions: !smips
Type: Command

Argument	Type	Description
interface	interface_enum

interface/lte/esim/refresh-profile-list

Conditions: !smips
Type: Command

Argument	Type	Description
interface	interface_enum

interface/lte/esim/esim-id

Conditions: !smips
Type: Command

Argument	Type	Description
interface	interface_enum

Read-only Argument	Type	Description
eid	string

interface/lte/esim/activate

Conditions: !smips
Type: Command

interface/lte/esim/deactivate

Conditions: !smips
Type: Command

interface/lte/esim/delete

Conditions: !smips
Type: Command

Argument	Type	Description
force-delete	bool

interface/lte/esim/set-nickname

Conditions: !smips
Type: Command

Argument	Type	Description
nickname	string

interface/lte/settings

Conditions: !smips, !i386, !mips, !powerpc
Type: Settings Directory

Argument	Type	Description
mode	enum (auto | serial | mbim | user | qmi)
esim-channel	enum (auto | at | qmi | mbim)
firmware-path	string
log-dir (syscap=modemlog)	string
info-polling-interval (syscap=tr069-client)	num
link-recovery-timer	num
sim-slot (syscap=sim-slot)	enum
sim-link (syscap=sim-link)	enum
external-antenna (syscap=modem-antenna-switch)	enum (auto | main | div | both | none)

Read-only Argument	Type	Description
external-antenna-selected (syscap=modem-antenna-switch)	enum (main | div | both | none | none)